Introduction: 3.5” HDD Bracket for 5.25"Drive Bay

Picture of 3.5” HDD Bracket for 5.25"Drive Bay

Most of us still have old CD/DVD-Roms which you already do not need, but you feel sorry to throw out

This instructable is how to give your old CD/DVD-Roms the second life.

Step 1: Disassemble CD/DVD-Rom

Picture of Disassemble CD/DVD-Rom

Unscrew the screws from the bottom and open the DVD.
to separate all the insides and leave only the box,

Insides you can leave for another project )))

Drill holes in the bottom, to connect HDD.

Step 2:

Picture of

tighten the Hard drive

connect the lid and box back

Step 3:

Picture of

Place the box in the computer case,

As you see it does not stick out of the case.

Connect the hard drive to the motherboard. Enjoy!

Comments

ronanry (author)2017-11-08

Good idea, it may even be easy to make the HDD more silent by putting silencer (soft plastic) between HDD and "the frame"

About This Instructable

263views

5favorites

More by garg11:3.5” HDD Bracket for 5.25"Drive BayTaranka (Salted and Dried Fish)What can replace the broken Intex Oars connector
Add instructable to: