Instructables

$3.50 DIY TV-B-Gone Micro

Featured

Step 12: Solder the LEDs Together

Set the two LEDs next to each other, with the blue one on the left and the flat sides facing up. Bend the top lead of the the clear one to the left, and the bottom lead of the blue one to the right. Solder them in parallel, and cut the excess as shown.

From now on, most of the pictures will be wrong. I did it a different way, then experimented and found that this one was better. Pretend the LEDs in the rest of the pictures are like this, sorry for the inconvenience!
 
Remove these adsRemove these ads by Signing Up