Print PDF
Favorite
Email
Step 7Add the Button
Cut off two of the four leads of the button, making sure you get two that are pointing to the same side. Flip the chip upside-down and solder one lead of the button to pin 8 as shown in the picture.
When the button is pressed, it will give the chip power. When the button is un-pressed, the chip gets no power and will turn off.
When the button is pressed, it will give the chip power. When the button is un-pressed, the chip gets no power and will turn off.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
