38 Piece Gun





Introduction: 38 Piece Gun

This 38 Piece Gun is suppose to shoot through cardboard.
This is not my idea BUT my friend was trying to build it using the instructable which is a video>
So i designed this so people with bad computers can make this FANTASTIC Knex Firing Gun.
This gun shoots
|| ----------

This gun shoots about 4 Inch red rods.

Step 1: Gathering Pieces

Gathering Parts

15-Red 3 Slot Connectors
2-Yellow 5 Slot Connecter
3-White 8 Slot Connecter
9-Orange 2 Slot Connecter
3-Gray 1 Slot Connecter

2 Red Rods
2 Green Rods

2 Thin Blue Spacers

Step 2: First Step

Grab one of the two red rods as seen in picture.

Step 3: Step 2

SLIDE on (do not snap on) and Orange Connector to the center of the red rod as seen in picture. this is the base of the trigger.

Step 4: Step 3

Snap in the2 green rods and slide one to thin blue spacers as seen in picture.

Step 5: Step 4

Snap on 3 of the 9 orange 2 slot connectors as seen in picture.

Step 6: Step 5

Snap on 3 of 3 white 8 slot connecters as seen in picture.

Step 7: Step 6

Snap on 8 of 15 red 3 slot connectors and 2 of 2 yellow 5 slot connectors as seen in picture.

Step 8: Step 7

Snap in last red bar on top as seen on picture.

Step 9: Step 8

Snap on the 3 gray 1 slot connecters as seen in picture.

Step 10: Step 9

Snap on the remaining orange and red connectors as seen in picture.



    • Clocks Contest

      Clocks Contest
    • Stick It! Contest

      Stick It! Contest
    • Planter Challenge

      Planter Challenge

    We have a be nice policy.
    Please be positive and constructive.




    just like to make it PERFECTLY CLEAR this is my gun. i am not saying the guy who posted this is trying to steal my instructable thing...but i am saying that it is my gun. just like to point that out. MY gun. so yea...blah...good idea with the "bad computers" thing...but i am too scared to think of a pc that cannot even run youtube videos.

    2 replies

    mine can, but in 30 second segments.


    mine cant

    This is the strongest gun I've ever made

    ehtem!i have created a very simple gun that is 3 times more sting and 3 times the power and speed of this gun it is only a 17 peice gun in my instructable i will show the 2 stitches my little cousin had to get from it and who wants me to post?well of course u do i will post when i get 500 views on my first instructable (400 now)ok ty!

    2 replies

    i have made a 3 part k'nex gun and it can go through cardboard(or it could)

    MEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEEE iwant i gun that is small and makes people in pain!

    1 question. can it shoot airsoft through cardboard?

    yourself...not that easy though...

    mines not quite strong enough to pierce cardboard, maybe its my rubber band, although mine is really strong, maybe I need a sharpened rod, do I do this my self or do you buy special ones?

    mine was so good that i turned it into a shotgun and the ammo is in a cartarage that you put in it.

    this is definetly the most powerful gun i have even made i made a brossbow type variation by putting wheels and its more powerfull than any gun on this site i also useda firing pin but taping an orange connector onto a red rod

    1 reply

    I agree. If you get shot in the eye at close range with this, you would have 0% chance of seeing again. I'm serious. This breaks glasses, impales apples, and seriously damages walls!!

    oh yea. and if you dont believe me...then just type "majorgeneralmckay" into youtube and it will come up with some knex gun vids and stuff and also the intructions...the ORIGIONAL one.

    how does it shoot there is no firing rod or anything

    4 replies

    the firing rod is the bullet you pull bk the bullet and it locks so wen you push the trigger it fires the bullet

    there aren't any rubberbands or anything though

    i made this gun of the youtube video and it didn't work