Print PDF
Favorite
Email
Step 123D CAD - Table Napkin Holder - B-Spline
-
Now - select the face of the inside opposite,
Then Select from the Sketching toolbar: B-spline by Control Points
Now - using the Status line cursor location as a guide, Click at the following locations:
1 -3.00; 1.00
2 -3.00; 2.00
3 -2.00; 2.50
4 -1.50; 3.00
5 -0.50; 4.00
6 -0.00; 4.00 (Double Click to end)
Before selecting the Sketch Mirror, you need to add a Mirror Reference Line.
Select the Line Options flyout menu to select the Reference Line icon
Create a Vertical Reference Line by clicking at the Origin at the bottom, and the upper end of the B-Spline at the top
Now - select the face of the inside opposite,
Then Select from the Sketching toolbar: B-spline by Control Points
Now - using the Status line cursor location as a guide, Click at the following locations:
1 -3.00; 1.00
2 -3.00; 2.00
3 -2.00; 2.50
4 -1.50; 3.00
5 -0.50; 4.00
6 -0.00; 4.00 (Double Click to end)
Before selecting the Sketch Mirror, you need to add a Mirror Reference Line.
Select the Line Options flyout menu to select the Reference Line icon
Create a Vertical Reference Line by clicking at the Origin at the bottom, and the upper end of the B-Spline at the top
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
