Print PDF
Favorite
Email
Step 133D CAD - Table Napkin Holder - Mirror
-
Select the Sketch Mirror icon in the Sketching toolbar at the bottom,
In the Mirror Figure Dialog:
Click inside the white area for Figures to mirror and then click the B-Spline Sketch. (B-spline<1> populates the field)
Click inside the white area for Mirror axis:
then click the Reference Line. (Reference Line<1> populates the field)
Also - a preview of the Mirrored B-spline is shown.
Click OK to complete the Mirror
Now - once again - you will need to create a closed figure to make the cut.
Select the Line options flyout again, and select the line icon from the flyout menu.
Click the lower left edge of the B-spline, then move up the left edge to one square above the Extrusion,
Click again, and move right, Continue right to the edge of the extrusion,
Click again, and move down to the end of the mirrored B-slpine,
Double Click to end the line and close the figure.
Select the Sketch Mirror icon in the Sketching toolbar at the bottom,
In the Mirror Figure Dialog:
Click inside the white area for Figures to mirror and then click the B-Spline Sketch. (B-spline<1> populates the field)
Click inside the white area for Mirror axis:
then click the Reference Line. (Reference Line<1> populates the field)
Also - a preview of the Mirrored B-spline is shown.
Click OK to complete the Mirror
Now - once again - you will need to create a closed figure to make the cut.
Select the Line options flyout again, and select the line icon from the flyout menu.
Click the lower left edge of the B-spline, then move up the left edge to one square above the Extrusion,
Click again, and move right, Continue right to the edge of the extrusion,
Click again, and move down to the end of the mirrored B-slpine,
Double Click to end the line and close the figure.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
