Print PDF
Favorite
Email
Step 53D CAD - Select the Sketch, and Apply Extrude Boss
-
The sketch may have disappeared while saving the file, but no worry just click Sketch<1> in the Design Explorer on the left, and then click Extrude Boss on the right from the Feature toolbar.
Sketch<1> will be already pre-selected as the sketch (It was highlighted upon entering the Extrude Boss Dialog), the Type is set at To Dept which is what we want for this first extrude, and the Depth is at the default of 5 units (5 mm), edit it to be 6.75 mm either by selecting it all, and entering 6.75, or clicking the upper selector until 6.75 mm is displayed.
Click OK the completed Extrude Boss is displayed.
The sketch may have disappeared while saving the file, but no worry just click Sketch<1> in the Design Explorer on the left, and then click Extrude Boss on the right from the Feature toolbar.
Sketch<1> will be already pre-selected as the sketch (It was highlighted upon entering the Extrude Boss Dialog), the Type is set at To Dept which is what we want for this first extrude, and the Depth is at the default of 5 units (5 mm), edit it to be 6.75 mm either by selecting it all, and entering 6.75, or clicking the upper selector until 6.75 mm is displayed.
Click OK the completed Extrude Boss is displayed.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
