Print PDF
Favorite
Email
Step 83D CAD - Set fixed reference line-1 (Edit the Sketch)
-
Mouse over Sketch<2> in the Design Explorer, Right-Click, from the menu, select Edit,
Click to edit that sketch. Now Click Project to Sketch from the bottom of the Sketching toolbar.
Click Create Reference figure, and Maintain association, click in Entities, and click the Top edge.
Now Click OK, and to make the top edge line just created more visible, click it to select it.
This line will be used to set alignment of the sketch Top line previously created.
Mouse over Sketch<2> in the Design Explorer, Right-Click, from the menu, select Edit,
Click to edit that sketch. Now Click Project to Sketch from the bottom of the Sketching toolbar.
Click Create Reference figure, and Maintain association, click in Entities, and click the Top edge.
Now Click OK, and to make the top edge line just created more visible, click it to select it.
This line will be used to set alignment of the sketch Top line previously created.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
