Print PDF
Favorite
Email
Step 103D CAD - Options - Grid, File Types
-
Click the “Grid” tab to advance to this section in the Options Dialog
Highlight the Spacing value for “X” - change to 5 mm, press Tab, and do the same for “Y”, and for “Z”
so that all are 5 mm.
Make sure "Display grid" is checked, and "Snap to grid" is checked.
Click the “File Types” tab and observe (only) the settings currently defaulted.
Leave them as is at this point.
Click the “Grid” tab to advance to this section in the Options Dialog
Highlight the Spacing value for “X” - change to 5 mm, press Tab, and do the same for “Y”, and for “Z”
so that all are 5 mm.
Make sure "Display grid" is checked, and "Snap to grid" is checked.
Click the “File Types” tab and observe (only) the settings currently defaulted.
Leave them as is at this point.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
