Print PDF
Favorite
Email
Step 133D CAD - Editing the Properties & Re-Saving
-
Again, Open the Properties Dialog: Key in the Properties Shortcut – Alt+Enter,
It default opens to the ‘Units’ tab, so – under ‘Display Units’ – ‘Length’ – for ‘Unit’ – Click the selector besides ‘Millimeters’ – Select ‘Inches’ and click it.
Leave other settings as they are at this point.
Click the ‘General’ tab – edit the note under Description – created in Step 3 – “Initial Millimeter default file” – to become “Initial Inch default file”
Click ‘Apply’, and click ‘Close’
Click ‘Ctrl+Shift+S’ for file – save-as – and again in the same tutorials folder as above –
Save this file – named exactly – ‘default-inch’.
Again, Open the Properties Dialog: Key in the Properties Shortcut – Alt+Enter,
It default opens to the ‘Units’ tab, so – under ‘Display Units’ – ‘Length’ – for ‘Unit’ – Click the selector besides ‘Millimeters’ – Select ‘Inches’ and click it.
Leave other settings as they are at this point.
Click the ‘General’ tab – edit the note under Description – created in Step 3 – “Initial Millimeter default file” – to become “Initial Inch default file”
Click ‘Apply’, and click ‘Close’
Click ‘Ctrl+Shift+S’ for file – save-as – and again in the same tutorials folder as above –
Save this file – named exactly – ‘default-inch’.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
