3D DDR Frame for PS2

Step 7 Wire the controller.

I bought an after-market controller for the Sony PS2. This one has the added advantage of being able to see through it. You can see where I soldered one wire each to the connection under each button. This is good enough for the DDR game. In fact, you only need to do the ones on the right side. I didn't bother with the analog controls, or the Start and Select buttons. This makes the controller still useable by itself.

There is also a Ground connection on the right and left side of the control board. Solder a wire to those also.

It is difficult to see, but there are actually five red wires coming out from each side of the controller.

Sorry for the lack of detail here, but I really didn't want to take it apart again to risk loosening a connection.