Instructables

3D Layered Paper

Featured
Picture of 3D Layered Paper
P1020379.JPG
P1020390.JPG
P1020382.JPG
P1020377.JPG
This is a simple 3D layered paper project that anyone can do from home. The paper sculpture is simply several layers of cutout paper that enhances and defines the image, making the 2D paper look as though it is 3D. It does take REALLY long to complete but once it is done, it looks beautiful. Hope the steps are clear and easy to understand.

Supplies:
- image (any image you want to use but simpler the image, the better)
- tracing paper
- pencil and eraser
- very nice paper to make the 3D layers
- mat board
- x-acto knife with lots of extra blades
- glue in a container with a small tip
 
Remove these adsRemove these ads by Signing Up

Step 1: Initial Drawing

Picture of Initial Drawing
I wanted to make a 3D layered deer so I pretty much looked up several images on google till I found one that I liked. To create this 3D layered look, any image will work but the simpler the image is, the easier and faster it will be to produce it. The image I choose took several days to finish and it was quite tedious. I printed the image in the size that I wanted the design to be, then I got some tracing paper and traced the image into simple shapes that I would be able to transfer it onto another piece of paper later.

Step 2: Tracing Paper

Picture of Tracing Paper
P1020424.JPG
After finishing the tracing paper drawing, instead of putting graphite powder on the back of the tracing paper, I just flipped the tracing paper over and re-drew the image backwards tracing over the lines. That way, when I do begin transferring the image, it wont get the nice paper too dirty. If you put a white sheet of paper behind the tracing paper, it will be easier to see the lines that you have drawn on the other side.
I'm still getting my feet wet with papercrafting/cutting/layering but have been doing origami for years. Please, please, please offer me some tips on making such great works as yours mount and "POP" out from the frame. My very talented girlfriend explained the use of miscelanneous backings and curling techniques to get the desired 3D effect, could you elaborate on that technique a bit further, and/or maybe offer some better tips on glueing and arrangement? What if your subject was a rottweiler for example? A fine-haired, mostly black dog with modestly bridled patches? I ask with a gift in mind.
sooooc1 year ago
That's be nice to share great job. Thank you!
Woah, awesome deer head without the dead deer part!
cjraabe1 year ago
This is wonderful! How 3D is this? That is, how many layers would you say there are in the highest point, or how deep is the image?

In your pictures, the deer looks like it could have similar dimensions to a "real" deer head mounted on the wall, but I'm guessing it's flatter than that. Or it is?
hannaoh (author)  cjraabe1 year ago
It's much flatter than a real deer head. I don't know how many layers there are but it's about an inch and a half/ two inches deep. I was considering counting all the layers but I can't find all of them. I glued layers on top of layers so some of the layers are hidden.
I guessed as much, but the pictures look so realistic. Thanks for responding.
paqrat1 year ago
Beautiful! And such a pleasure to see an instructable like this that isn't using something like a laser cutter. I don't know if I would ever try something like this but if it had to be done with a laser cutter I know I never would. I don't know how easy it would be to transfer the image but I can see this in my mind in a light weight copper foil. I also like the way you glued the image on top of the frame. I think it extends the dimensionality of the piece. Really beautiful piece and very helpful, useful instructable. I'm thinking about trying it with images of buildings.
hannaoh (author)  paqrat1 year ago
Thank you! I'd really like to see yours when you finish. :)
paqrat hannaoh1 year ago
Thank you. Unfortunately I am much better at the planning to do something than the actual execution. But maybe I'll get this one going.
J-Ri1 year ago
Awesome!

I may have missed it somewhere, but how many sheets of paper did you use for this?
hannaoh (author)  J-Ri1 year ago
Sorry, I didn't think of mentioning how many sheets I used. I think I used like 6 to 7 sheets of reeves paper, maybe more. I honestly don't remember. I had a little stack of the reeves paper at home and I knew I had enough so I didn't count. I guess it depends on how big the design in going to be and how many layers are going to be added.
J-Ri hannaoh1 year ago
Wow, that's really cool, it looks so much deeper than that!
Starrystar1 year ago
Are you transferring the image by rubbing the eraser on the back? How interesting!
hannaoh (author)  Starrystar1 year ago
No, but that is a great idea. I actually just retraced over again with a mechanical pencil.
poofrabbit1 year ago
Congratulations on being one of the winners in Scoochmaroo Papercraft Challenge!!
hannaoh (author)  poofrabbit1 year ago
Thank you! :D
poofrabbit1 year ago
What kind of paper did you use? At firs ti thought it was reeves, but on another glance it looked like a hot press watercolor paper? I'm just curious. I'm looking at images and have been thinking about your project and may attempt. I go back and forth on adding color to the paper, if it's a watercolor paper it could be cool, but then again it might also take away from that awesome layered look, there is something very peaceful and sculpture like about having it all one tone. Again wonderful job, I downloaded the PDF of your project and keep finding myself coming back to you link because I'm just enamored by this!
hannaoh (author)  poofrabbit1 year ago
Your right, it is reeves paper. I actually was going to use hot press watercolor paper but the reeves paper is a little thinner and easier to cut into smaller shapes. And yes, I choose to use one tone because it creates a very serene and sculptural aesthetic. I thought that if I used color, it would make it look too playful.

Anyways, I'm glad you like it. I never thought that this, being my first instructable, would be featured or viewed by so many people. When you make yours, I'd really like to see it. :D
I have to laugh because it's just plain sick that I can identify paper from a photograph! I think you were 100% right to keep to the one tone, I think more than that...it might look "cheap", this is a work of art. I also really enjoy that the mat was also white! It's just awesome!

I will be happy to show you what I make, I'm going back and forth on what I want to do. I may be "forced" to make more than one!

You deserve to be featured and to have so many looks, this is truly stunning!
This is fantastic! Beautiful work.
Foxtrot701 year ago
I looked at your Instructable again...all I can say is WOW! It is difficult to be the creator of a project and also the documentarian. The creative process becomes all consuming.
Foxtrot701 year ago
Excellent work! Have you tried colored paper or painting the paper before assembly? Does coloring come out as well as the white paper?
spyder20211 year ago
I love this design and concept. Really easy and really cool. Love the work/time you put into it. Just goes to show you get what you put into it.
poofrabbit1 year ago
This is awesome!! Very well done!
ChrysN1 year ago
That looks gorgeous!
rimar20001 year ago
Very nice!
Kiteman1 year ago
A 3d project that doesn't require 3d printing - excellent!
That is absolutely lovely. Excellent work. :D
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!