Introduction: 3D Paper Snowflake

Easy to make 3D paper snowflakes look beautiful hanging on a wall or in a window.

You will need:

  1. White paper
  2. Blue paper
  3. Ruler
  4. Scissors
  5. Pencil
  6. White glue or glue stick

Step 1: Make a Square From the Sheet of White Paper

Picture of Make a Square From the Sheet of White Paper

Step 2: Fold This Square Several Times

Picture of Fold This Square Several Times

Step 3: Bend the Triangle As Shown in the Photo

Picture of Bend the Triangle As Shown in the Photo

Step 4: Cut Off the Part of This Triangle As Shown in the Photo

Picture of Cut Off the Part of This Triangle As Shown in the Photo

Step 5: Make Cuts

Picture of Make Cuts

Step 6: Expand the Snowflake

Picture of Expand the Snowflake

Step 7: Make the Square of Blue Paper of a Smaller Size

Picture of Make the Square of Blue Paper of a Smaller Size

Mark at 3 cm in two sides and draw a line

Step 8: Make the Next Square of White Paper Smaller Than the Second

Picture of Make the Next Square of White Paper Smaller Than the Second

Mark at 5 cm in two sides and draw a line

Step 9: Make the Square From the Piece of Blue Paper

Picture of Make the Square From the Piece of Blue Paper

Step 10: Glue the Snowflakes in the Center

Picture of Glue the Snowflakes in the Center

Step 11: Make Some Snowflakes for the Back Side

Picture of Make Some Snowflakes for the Back Side

Step 12: Glue Two Halves

Picture of Glue Two Halves

Step 13: Experiment With the Sizes and Colors of the Snowflakes!

Picture of Experiment With the Sizes and Colors of the Snowflakes!

Comments

DIY Hacks and How Tos (author)2017-11-11

Amazing looking snowflakes. I am definitely going to make some of these with my kids for Christmas.

About This Instructable

248views

7favorites

License:

Bio: Turning fantasies into reality!
More by Three Suitcases:3D Paper Snowflake
Add instructable to: