Instructables

3D Printing a Cabbage Moth / Butterfly Decoy to Save Your Cabbage

Featured

Step 5: 3D Print and Clean Up

Picture of 3D Print and Clean Up
IMG_1291.JPG
I used white ABS as well as some pink for my daughter and a few glow in the dark ABS materials.

Once printed you can use acetone to clean up rough edges or an exacto knife. After cleaning up use some sandpaper to roughen the surface to a matte finish.
 
Remove these adsRemove these ads by Signing Up
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!