Introduction: 3D Wagon
A power point of the wagon designing process to download.
Step 1: Introduction to Modeling in Rhino
These are some preliminary steps to modeling in Rhino.
Selecting the correct scale is important so the end model
is the right size.
Step 2: Beginning to Model the Wheel
These slides show how one creates wheel spokes, beginning
with a cylinder, to creating spokes by arraying the cylinder
around a central point so that they form a base for the rim.
Step 3: Creating Wheel Spokes
The wheel spokes need to radiate out from a central
point. This section shows how that is achieved.
Step 4: Adding a Tire and Joining It to the Spokes
When adding a tire, it's important that
it's centered on the spokes.
Step 5: Adding an Axle
How to add an axle so that it's centered on the wheel.
Step 6: Creating the Second Wheel
Show an easy way to create a wheel second wheel
so that it is straight and lined up on the axle.
Step 7: Joining the Wheel and Axle
Steps for connecting the wheels to an axle.
Step 8: Creating the Wagon Floor
Creating the wagon floor is simply a rectangular
box attached to the 2 axles. The wheels will not turn.
Step 9: Rendering Your Model
Not essential but it helps to get an idea
of what your model looks like.