Introduction: 3D Printable Hamster House

Picture of 3D Printable Hamster House

This is a 3d printed hamster house that your hamster will love. Smiles guaranteed.

Step 1: Get the File

First go to Thingiverse and type in #Instruct or go to http://goo.gl/Jx5TmU

Step 2: Slice It

Then put the file into your 3D printer software. For the fastest time and good results I recommend 0% infill and 1 shell. Pints at the maximum size of a Makerbot Replacator 2. HAVE FUN

Step 3: Remove It and Add the Pet

Picture of Remove It and Add the Pet

Comments

seamster (author)2015-04-04

Nicely done! Will the hamster chew this stuff up? What have you found thus far?

3drobot (author)seamster2015-04-08

I have tested it and my Chinese dwarf hamster does chew on the door arch but using the settings I recommended it can stand up and resit any plastic coming off. Hope that helped. Please vote.

ashleyjlong (author)2015-04-05

Cute hammie! I'm also curious about the chewing. Mine used to like gnawing on doorways especially. Hope your nice work holds up to the tooth test!

3drobot (author)ashleyjlong2015-04-08

I have tested it and my Chinese dwarf hamster does chew on the door arch but using the settings I recommended it can stand up and resit any plastic coming off. Hope that helped. Please vote

About This Instructable

632views

4favorites

License:

More by 3drobot:3D printable hamster house
Add instructable to: