Instructables

3d PAPER SNOWFLAKE

Featured
Picture of 3d PAPER SNOWFLAKE
 
Remove these adsRemove these ads by Signing Up

Step 1: YOU NEED 10 PIECE OF PAPER 10cm X 10cm

Picture of YOU NEED 10 PIECE OF PAPER 10cm X 10cm
YOU NEED 10 PIECE OF PAPER 10cm X 10cm

Step 2: FOLD

Picture of FOLD
FOLD

Step 3: FOLD AGAIN

Picture of FOLD AGAIN
FOLD AGAIN

Step 4: FOLD

Picture of FOLD
FOLD

Step 5: MAKE THE LINES AS ON FOTO

Picture of MAKE THE LINES AS ON FOTO
MAKE THE LINES AS ON FOTO

Step 6: CUT

Picture of CUT
CUT

Step 7: FOLD OUT

Picture of FOLD OUT
FOLD OUT

Step 8: TAKE 5 PIECES AND PUT ON THE TABLE

Picture of TAKE 5 PIECES AND PUT ON THE TABLE
TAKE 5 PIECES AND PUT ON THE TABLE

Step 9: CONNECT WITH STAPLER

Picture of CONNECT WITH STAPLER
CONNECT WITH STAPLER THE OTHER % MAKE THE SAME WAY

Step 10: TURN THE CONSTRACTION

Picture of TURN THE CONSTRACTION
TURN THE CONSTRACTION

Step 11: TAKE THE OTHER 5 SET

Picture of TAKE THE OTHER 5 SET
PUT ONE ON THE OTHER AND CONNECT WITH STAPLER

Step 12: NOW YOU HAVE THIS SNOWFLAKE

Picture of NOW YOU HAVE THIS SNOWFLAKE
NOW YOU HAVE THIS SNOWFLAKE
Korlee2 years ago
Where is the center of the paper?
jweems4 years ago
Which side of the fold should the markings go?

I think the fold is on the diagonal side.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!