Introduction: 3d Printed Cybermat 2.0
In this Instructable I am making a new and improved Cybermat from Doctor Who.
Step 1: Printing
I 3d printed the model on my CubeX.
The file can be found here.
Step 2: Removing the Supports
I used needle nose pliers and wire cutters to break off the supports.
Step 3: Sanding
I used different grits of sandpaper to smooth the surface of the Cybermat.
Step 4: Wood Filler
Ok used a small piece of wood to apply wood filler to the Cybermat
Step 5: More Sanding
I used 220 grit sandpaper to smooth the wood filler on the Cybermat.
Step 6: Painting
First I painted it silver them I applied a wash off black paint to make it look more metallic.