Introduction: 3d Printed Mini Cybermat

Picture of 3d Printed Mini Cybermat

In this Instructable I am making a mini Cybermat from the episode "closing time" of Doctor Who.

Step 1: Printing

Picture of Printing

I designed the file in 123d design and printed it on my CubeX. The files can be found here

Step 2: Removing Supports and Sanding

Picture of Removing Supports and Sanding

I used a wire cutters and needle nose pliers to remove the supports then to smooth the surface of the print I sanded it with 220 grit sandpaper and a dremel and used a file for the sharp edges.

Step 3: Painting

Picture of Painting

First I painted it silver then I put on a few washes of black acrylic paint.

Step 4: Full Video


brooklynjohn (author)2016-11-25

Really cool. Love it.

RobertW327 (author)2016-11-25

cool .

About This Instructable




Bio: YouTube channel: The Urban Ape
More by struth novo:Making an Awesome Bith/Cantina Band MaskBecoming a Walking Dead Style ZombieMaking Jawless Zombie Prosthetics
Add instructable to: