Print PDF
Favorite
Email
Step 6Fitting the Top Section
Using the plywood board once again, apply firm and even pressure to slowly seat the top section on to the can just previously cut.
Once the cans have been fully seated, cut the center section out of the top with a utility knife. Insert the knife and slowly work your way around the can, using the groove as a guide.
Once the cans have been fully seated, cut the center section out of the top with a utility knife. Insert the knife and slowly work your way around the can, using the groove as a guide.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
