Introduction: 4-Object Pencil Gun

Picture of 4-Object Pencil Gun

This is just an instructable on how to make a simple "gun" to shoot pencils.

Step 1: Supplies:

Picture of Supplies:

Pliers, Spring, Large Screw (To fit in spring)

Make sure the spring has a top like the one in the picture. 

Step 2: Get the Right Screw.

Picture of Get the Right Screw.

The scew threads need to be thin enough to fit in the spring good, but make sure the head does not fit in the spring. The screw cannot be sharp.

Step 3: Place the Screw in the Spring.

Picture of Place the Screw in the Spring.

Like the picture.

Step 4: Bend the Wire.

Picture of Bend the Wire.

Using the pliers bend the wire over the screw head so it's like the picture.

Step 5: When Finished...

Picture of When Finished...

It should look like the picture.

Step 6: Now That It's Finished...

Picture of Now That It's Finished...

Place your pencil in the spring.

Step 7: *Pull Your Screw Back and Shoot.

Picture of *Pull Your Screw Back and Shoot.

*Not liable for damage, lost eyes, etc.
*Pencil was sharpened

Comments

About This Instructable

891views

2favorites

License:

Bio: I am finally a yellow belt in Tae Kwon Do, I have been playing guitar for 2 years now, any skill of which is of ... More »
More by resophonicguitarist:4-Object Pencil Gun
Add instructable to: