4-in-1 Hat, Scarf, Fingerless Gloves & Mitten Pocket Combo!

Step 6 Sew it all together!

You now have a hat and a scarf with the fingerless gloves already sewn in and the pocket opening already cut out.  It's now time to sew the hat and scarf together!

1.  Place the hat on your unfolded scarf, right sides facing.  Line up the unsewn seam on the hat (the back of the hat) with the seam in the middle of the scarf. 

2.  Fold the scarf up lengthwise again.  When you do this, make sure to completely shove the entire hat (the front of the hat) into the folded scarf.  Keep the unsewn opening of the hat sandwiched between the edge of the scarf.

3.  Sew around the entire scarf edge and right over the sandwiched part of the hat.  This is what connects the scarf and hat together.

4.  At the ends of the scarf, you can either sew a square edge (shown by the blue dotted lines), or as I prefer, a rounded edge (shown by the yellow dotted lines).  The rounded edge makes your scarf ends look more like a mitten. 

6.  You will now have a scarf with a hat bunched up inside of it.  Now use the mitten pocket openings to turn the entire scarf right side out and to pull out the hat.