48V Electric Flat Tracker

FeaturedContest Winner

Step 10: First Assembly

Picture of First Assembly
The battery trays were fabricated from aluminum stock. Each tray was then riveted together and bolted to a right and left panel. The panels are then bolted to each side of the frame. Note the power switch in the center. The right and left panels are asymmetrical to accept the terminals on the back side of the power switch. The controller is mounted upside down under the top tube with the terminals pointing backwards.
Remove these adsRemove these ads by Signing Up
Matt Carl3 years ago
How did you cut the aluminum and attach it to the bike?
i assume he just cut it w/ a metal blade for a jig saw or band saw.
as for attachment i can see metal screws or bolts just above the batteries on the 2nd picture that attach to the frame.

Get More Out of Instructables

Already have an Account?


PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!