Step 23: Connect all the TLCs

Connet all the wires that go between the Arduino chip and the TLCs, remember that all but one wire go to all the chips, the only one that doesn't connect to all of them is the serial one, which goes Arduino->(SIN[TLC1]SOUT)->(SIN[TLC2]SOUT)->(SIN[TLC3]SOUT).

See pic 2 for the wiring.

About This Instructable


286 favorites


Bio: Interested in all kind of projects, mainly electronics but other stuff too! I try t publish everything I make, eventhough this is not always possible ... More »
More by Emiliano Valencia: Tubulum 4x4x4 RGB LED Cube LED Binary Clock 2.0
Add instructable to: