Introduction: 5 Minute Homemade Soap

Casting soap is simple, fun, and super satisfying – AND can happen in under 5 minutes, once you have all the materials you need of course! :D

To make the soaps in this instructable, I used clear glycerin soap (for the gem shape) and shea butter soap (for the ducky one), both of which I added color and scent to.

PSST... The soap materials I used melt in minutes in the microwave, which is how this process can be done so quicky!

Step 1: Supplies

Here are the tool and ingredient lists for making both translucent and opaque soaps:

Tools

  • Microwave safe glass measuring cup
  • Cutting board
  • Sharp chef's knife
  • Small spoons or wooden stir sticks
  • Soap molds*

*The molds I use in this 'ible are from my Mold Making & Casting Class. If you'd like to learn how to make your own custom molds – for making anything from soap to cakes to candy and chocolate – enroll for free today!

For more instant gratification, commercially made soap molds are available in all sorts of fun shapes (like these) on amazon.com! :D

Translucent Soap

Opaque Soap

Step 2: 5 Minutes of Soap Making

Step 1: Figure out how much soap base to melt.

In order to know how much soap base to melt for each soap mold, fill the mold with water (right to the top edge) and dump the water out into a measuring cup. This is the amount of soap you need to melt to fill that mold.

Step 2: Cut soap base into chunks and add required amount to glass measuring cup.

Cut the soap base you're using into small cubes or chunks with a sharp chef's knife. Add pieces to a microwavable glass measuring cup until they reach the line that is twice as much as the final amount you need.

For example: If you need 4 oz of melted soap base to fill your mold, fill the measuring cup to the 8oz line. We do this to compensate for all the spaces and gaps between the pieces.

Step 3: Melt the soap.

To melt the soap, place it in the microwave, one batch at a time, for 30 second intervals until it is completely liquid with no chunks.

If you miscalculated and need to add more soap chunks to the melted amount in order to end up with the correct volume, that's ok to do! Just add them in, and microwave in 15 second intervals until those have melted.

Step 4: Add the coloring and scents.

Once the soap is completely melted, add color and essential oils if you wish.

For the 4 fl oz bar sized translucent 'gem' soap, I added 10 drops of color and 4-5 drops of essential oil. For the 11 fl oz opaque 'ducky' soap, I added 40 drops of color and 10 drops of essential oil.

Step 5: Mix and pour.

Stir the mix well and pour it slowly into the molds until the mix reaches the top edge of the mold.

Let sit undisturbed until the soap has solidified. The time this takes will depend on the size of your mold – anywhere from 30 minutes to 2 1/2 hours. The great news is though, that your 5 minutes of making are up! So you can now just kick back and do another thing while the soap hardens. :D

Step 6: Demold the soap.

Once the soap has set, carefully remove the soap from the mold, much like you would an ice cube from an ice cube tray.

And there you have it! These make great gifts and can be a fun afternoon craft project with friends.

Again, if you'd like to learn how to make your own molds for custom shaped soap or other craft projects, check out my Mold Making & Casting Class!!

Happy making!

Comments

author
Madeaj (author)2017-05-24

Nice instructable, thank you. I love melt and pour soap. Its so versatile.

author
Paige Russell (author)Madeaj2017-06-05

Thanks Madeaj! I agree, it's the best! :D

author
cherittfn (author)2017-05-28

Nice instruct. I am just now looking into soap making, and this is a good timely instruct.

author
Paige Russell (author)cherittfn2017-06-05

Thanks cherittfn!

author
Oncer (author)2017-05-29

Fantastic! Thank you for sharing. I did always think soap production was an industrial process (an idea that I got from making soap in school - boiling fat and alkalis anybody?) and I didn't know you could buy bases and add your own bits'n'bobs. Thank you again!

author
Paige Russell (author) Oncer2017-06-05

You're so welcome! It's such an easy and fun project and the results are so useful. I'm obsessed. :D

author
Castle_Cair_Paravel (author)2017-05-25

This looks fun. I've always wanted to make homemade soaps!

author
Datawolf (author)2017-05-24

Homemade soap is made of caustic soda and oil...

author
Madeaj (author)Datawolf2017-05-24

Melt and pour soap is made of caustic soda (lye) and an additional process to make it clear. So this is real soap, its just pre-made, easier and safer to use.

About This Instructable

8,879views

116favorites

License:

Bio: Made in Canada, I grew up crafting, making, and baking. Out of this love for designing and creating, I pursued a BFA in product design ... More »
More by Paige Russell:3D Printed BobbleheadImport McMaster-Carr Components Into Tinkercad5 Minute Homemade Soap
Add instructable to: