Introduction: 5 Minutes Simple Wind Turbine for Everybody

I am fascinated with wind turbines and green energy. Today, I tried a new simple project that anybody can make.

I found this old fan blade assembly and decided to use it in something useful.

Thank you for reading my instructable.

You can read books on Amazon



Step 1: Tools and Components

Here are all you need

Components:

Generator from Amazon US , Amazon DE , Amazon FR, Amazon UK , Amazon CA , Amazon ES , Amazon IT , eBay , Banggood , FlipKart India , Lazada, aliexpress

Old fan blades from Amazon or eBay or Banggood , Aliexpress

LED from Amazon or eBay or Banggood , Aliexpress

Tools:

Voltmeter from Amazon or eBay or Banggood , Aliexpress

Screwdriver from Amazon or eBay or Banggood , Aliexpress

Step 2: Assemble Your Turbine

Now connect the fan blades to the motor shaft and use the screwdriver to install tighten the screw.

Now you've got your fully functioning wind turbine.

Let's test it in the wind.

Step 3: Test the Turbine in the Wind

In this step, I tested the wind turbine with a Voltmeter and an LED.

As you can see, when the wind blown so strong, the LED was brighter. Also, the Voltmeter has measured about 30volts open circuit (with no load).

Thank you for reading my instructable.


You can also find my book Learn By Making on Amazon website.

Comments

author
AlexK212 made it! (author)2017-07-23

very good

Build a generator with a small motor and illuminates me more led I use a thief joules, it illuminates me more than 15 led

About This Instructable

3,762views

46favorites

License:

Bio: Embedded Systems Engineer. Love to travel , run , design useful stuff and grow green plants. I joined instructables.com on 2008 and my first instructable was ... More »
More by ahmedebeed555:TurbineOne V2 : Super Simple Wind Turbine You Can Make NowLight Fidget Spinner Using DC Motor. No Bearing. No Glue Needed5 Minutes Solar Mobile Phone Charger
Add instructable to: