Print PDF
Favorite
Email
Step 25Instant Folding Sawhorses
Cut two rectangular chunks of plywood, drill some holes, and tie them together like this.
The chunks of pipe insulation pad the top for this use as boat stands.
Not that my boats would suffer in any visible way from contact with plywood.
The chunks of pipe insulation pad the top for this use as boat stands.
Not that my boats would suffer in any visible way from contact with plywood.
| « Previous Step | Download PDFView All Steps | Next Step » |
4
comments
|
Add Comment
|
Jul 21, 2008. 3:51 PMphotofairy81
says:
Instead of pipe insulation, you could use pool noodles. You can find them at the dollar store in the summer, so they are SUPER cheap, plus they are about the same thickness AND they come in BRIGHT colors, so you'd be able to spot them better in the garage and where they are when you're trying to put bulky stuff on them??!!
Reply
Aug 27, 2007. 11:55 PMsurf3r
says:
freedive57 - looks like a concrete canoe! :) must be an engineer...
Reply
Aug 9, 2007. 5:39 PMfreedive57
says:
Where's the instructable for the boat?
Reply
Aug 9, 2007. 5:38 PMfreedive57
says:
Elegant. Sturdy. Never seen before. You are a genius. PLywood elements can be reused if necessary. I will remember this one.
Reply
 |
Add Comment
|
