Step 26: Pallet Sawhorses

josh_keumpel_sawhorse.JPG
Here's Josh Kuempel with his pallet sawhorses.

He's a big guy and he needed big sawhorses.
A few minutes later he had them.
Go Josh!
 
Remove these adsRemove these ads by Signing Up
cat_size says: Sep 24, 2007. 1:25 AM
The pallets I was using were really old and rickety and were not meant to last more than a couple of days. To secure them at the top, I just drilled them together directly with a couple of long screws. -Josh
freedive57 says: Aug 9, 2007. 5:42 PM
Right On. Add another scab at the angle on each side that will let you add a top board and it will also keep the pallets together at the top. With a top board you can stand on the top. With the bottom of the pallet facing out like this you can use it as a ladder to get to the top.
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!