Print PDF
Favorite
Email
Step 5Finish connecting barrels and put on a PVC pipe
Using a closet flange on the inside and a flange spacer on the outside, sandwich the barrel halves together.
Repeat the process until all barrels are solidly connected.
Pound the PVC pipe through all of the barrel sets making keeping the barrel sets at 90 degrees apart.
Then drill through the closet flanges into the pipe and use sheet metal screws to keep the barrels in place (or clean and glue instead).
Repeat the process until all barrels are solidly connected.
Pound the PVC pipe through all of the barrel sets making keeping the barrel sets at 90 degrees apart.
Then drill through the closet flanges into the pipe and use sheet metal screws to keep the barrels in place (or clean and glue instead).
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
