Introduction: 6-Outlet Surge Protector

Picture of 6-Outlet Surge Protector

This guide will tell you everything you need - and more - about the installation and use of your FoxSmart 6-outlet surge protector.

Step 1: Remove From Box

Picture of Remove From Box

Open the box and remove the surge protector.

(though you've probably done this already...)

Step 2: Connect

Picture of Connect

Connect small electronic equipment to the surge protector. Be smart - don't use this surge protector near water or excessive temperatures.

Step 3: Plug In

Picture of Plug In

Plug your surge protector into a grounded wall outlet. Like magic, your electronics will be protected from power spikes up to 90 joules.

Step 4: Reset Button

Picture of Reset Button

If needed, there is an on/off switch at the top of the surge protector. This is used to reset the unit.

Step 5: Danger

Picture of Danger

Please note that if your indoor horse is not housebroken, it is a good idea to take preventative measures so that your surge protector is not damaged while in use.

Comments

About This Instructable

171views

1favorite

License:

Bio: We love instructables. We make and tear up and improve and sometimes destroy. Some of this are instructions for use of our products. Some of ... More »
Add instructable to: