8 Ft Wingspan Coroplast RC Piper Cub Flown by 25cc Weed Trimmer


Step 18: Tale servo's

Picture of Tale servo's
Tale in the air close.jpg
Just like the wing, cut holes in the tale for the servo's, I used high torque servos because the surfaces are so large. Reinforce the coroplast around the servo's with hard plastic and pre-drill for the screws.
You can see were to mount them from the pics, also use the larger push rods here.

You will need the other two servo extenders here as well.
Remove these adsRemove these ads by Signing Up

Get More Out of Instructables

Already have an Account?


PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!