Instructables
Picture of 8 Leds
I'll be showing you how to control 8 LEDS and I will be showing you how to make it as we start to build it
 
Remove these adsRemove these ads by Signing Up

Step 1:

Picture of
now u are going to want to put the LEDS in the breadboard but you are going to put the positive points of the LEDS in pin 2 on the breadboard. now you are going to skip a pin and put the LEDS in and just do that with all of the LEDS.

Step 2:

Picture of
Then its time for the resistors and you are going to put the resistors on the negative side on the LEDS.

Step 3:

Picture of
Then its time for the resistors and you are going to put the resistors on the negative side on the LEDS.

Step 4:

Picture of
0.266902061225505320130722_003928.jpg
IMG_20130722_004641.jpg
IMG_20130722_004654.jpg
then its on to the programming and u can download the code from (http://ardx.org/CODE02