Print PDF
Favorite
Email
Step 3Install The Velcro
Take the fuzzy side of the Velcro and cut the width down to the size of the frame and 1.5 inches long. Clean the frame with rubbing alcohol to assure a good bond. Place the Velcro tabs in the locations shown in the pictures. Be sure to place them on the side without a spline groove. Notice the sides use two pieces on the top edge.
Note: I forgot to get these pictures before the diffuser was installed. Don't get confused, you do that in the next step.
Cut six pieces of One-Wrap 4 inches long and two 3 inches long. (Not Shown)
Note: I forgot to get these pictures before the diffuser was installed. Don't get confused, you do that in the next step.
Cut six pieces of One-Wrap 4 inches long and two 3 inches long. (Not Shown)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
