Print PDF
Favorite
Email
Step 4Completed Bike Carrier
The finished project!
Lesson Learned:
I mounted the vertical pipes twice. The first time, with the bike pointing to the left, the drive train (the chain and gears) were on the same side as the pipes, which made them rub together. That seemed like a bad idea. So I moved the flanges so that the tall one was on the right instead of the left. Of course, that would have been easier if both of the pipes were 3/4" pipes.
Lesson Learned:
I mounted the vertical pipes twice. The first time, with the bike pointing to the left, the drive train (the chain and gears) were on the same side as the pipes, which made them rub together. That seemed like a bad idea. So I moved the flanges so that the tall one was on the right instead of the left. Of course, that would have been easier if both of the pipes were 3/4" pipes.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
