With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
I made at Techshop Start in Winter, finish in Summer
Seams to be obvious, if I had a cold kitchen,
... to solve the problem of a cold kitchen using the e wood stoven of the living room as a heath source and the convector to capt the heath ...
...go to Tecshop make the heater system, I remove all cabinets and kitchen appliances and engrave the kitche floor and put a Polyestire pipe from Home Depot
I made it at Techshop
And the old and rusted convector do not surrender without a good fight
, and save the case to use in another project in the future (may be another instructable...ahaha...)
That i find in home Depot for around $150 for circulate water in the system
I decide give a lift for the kitchen, new cabinets, new oven, new microwave, and new refrigerator. Now my kitchen is gorgeous and warm :) (may be the kitchen remodeling ...
... like that
This pipe was donation of Techshop. By the way, all projects I was done in Techshop was normally free parts and material from Techshop :)
Because the Convector do not came with out fight we have some wounded to repair before put the convector in service again Simples problem can be a big problem when: ...
(like this big washer) every new thing or new necessary party turn to be a Instructable by it self but that not is my point here, my goal ...
The roles in the pipe case was a bit farther from the convector size (Opss...ahahah...) than I need stretch the convector hanging for one side and pull from the other ...
3D Printed Tiny Homeby Solarcycle
Kitchen stuck in the 80's !!by jlross61
The Ultimate Room With Everything You Need To Live And Moreby Firephoenix123
How to install hard wood floorsby techshopmember
DIY Ikea Kitchen Islandby GardenFork
Join 2 million + to receive instant DIY inspiration in your inbox.
Download our apps!
© 2016 Autodesk, Inc.