A Dieselpunk Desktop Clock

Hi everybody,

this is my first piece of DieselPunk.  :-)

The clock shows the seconds, minutes and hours by industry mA meters.
It is drive by a DIY kit from a German company called ELV.
The CPU - Board inside controls a real time clock and get the time from a LW - time - transmitter near Frankfurt.

A switch switches the electronics off, a backup battery keeps the time in the real time clock.

Step 1: Parts

• Lots of MDF pieces regarding to the design you like
• Hammerit effects paint
• DIY Kit from ELV
• A battery holder for 9V batteries
• Some Cables
• 3 mA meters
• A switch

Assembling  the KIT is easy because the SMD parts are already soldered on the board.
All parts needed comes with the kit. Even additional trimmer to adjust nearly every type of mA Meter without shunt inside.

Step 2:

To build the case follow the instructions on the pictures below