Introduction: A Fun Rubber Band Bird Call

A Bird Call using rubber bands (cordage and grass can also be used). Use a green branch, With a knife split the branch and remove a bit from the center of each half so you can blow through it. you can also remove the bark if you want.

Step 1: Name This Instructable

Use one band to hold a cut wider band at one end of your branch. Cover hole with your mouth and blow. Pull on rubber band or grass blade to change notes.


xZCodmaNZx made it! (author)2009-06-03

awesome ill try to use it for hunting to see ho it works XD

X_D_3_M_1 made it! (author)2007-11-05

i dont get it. you cut a branch in two, remove pith, and rubber band it together?

Wafflicious made it! (author)Wafflicious2008-11-24

ye you have to put the broken rubber band along the stick; I do this exept with my thumbs and grass.

Matin made it! (author)Matin2007-11-08

Not sure what happed to the photos. Seems like Instrtuctables may have dropped them? For now please go to: <a rel="nofollow" href=""></a> to see them.<br/>

X_D_3_M_1 made it! (author)X_D_3_M_12007-11-08

now i get it

the rubber band made it! (author)2006-05-22

Huh please explain?

Matin made it! (author)Matin2006-05-31

Make one; hold the slit to your mouth; blow through the slit while pulling on the cut end of the larger rubber band that extends from the end that is not secured the small band. The more you pull: the higher the whistle you get. You should be able to make a wide variety of bird call and other sounds. It is quite effective and fun.

clint eastwood made it! (author)2006-05-05

cool im the first one to comment on this project

About This Instructable




Bio: http ...
More by Matin:Dugout CanoeOne Hour Trash Can Fish PondMake a Two Bladed Wallet Knife from a Hack Saw Blade
Add instructable to: