Print PDF
Favorite
Email
Step 5Make Rooves for the Domes
Fold the top tab on each dome segment inwards so that they make a flat rim on which to place the roof of each dome.
Now put your half-assembled domes on the PETG sheet plastic and mark the size needed to make a top. Now cut it out.
Using more split pins and the same technique used to assemble the domes from the segments, fix the roof to each dome.
Now put your half-assembled domes on the PETG sheet plastic and mark the size needed to make a top. Now cut it out.
Using more split pins and the same technique used to assemble the domes from the segments, fix the roof to each dome.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
