Print PDF
Favorite
Email
Step 6Prepare the Skirt
Now cut out the long sections of PETG plastic to make the skirt that is the lower part of the cone of silence.
I suggest about 40-60cm high, and 2x2.4m lengths to make a full size cone of silence with 50-60cm wide domes.
You will want to prepare 2-3cm tabs along each of the narrow edges.
Join these together using more split pins.
I arranged for the resulting seams to be located at either end of the cone.
I suggest about 40-60cm high, and 2x2.4m lengths to make a full size cone of silence with 50-60cm wide domes.
You will want to prepare 2-3cm tabs along each of the narrow edges.
Join these together using more split pins.
I arranged for the resulting seams to be located at either end of the cone.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
