With Instructables you can share what you make with the world and tap into an ever-growing community of creative experts.
This bookmark will tell you exactly on which page and at which line to begin reading again. This bookmark was made from plastic file folders of contr...
I used a sliding paper cutter to cut pieces 5/8 inch wide. For accuracy I measured along the length of the edge to insure the piece has a uniform wid...
The blue piece slides on the red piece. Make the blue piece 1 1/4 inch wide and about 2 1/8 inches long. I have a hole punch that makes 1/8 inch h...
Two slots will be cut across the blue slider. Use the red long piece to mark the ends of the slots with dots.
Use a knife or chisel to cut a slot between each pair of dots.
Slip one end of the red long piece through the slots in the blue slider.
You can see that one hole is visible from one side of the bookmark while two holes are visible from the other side of the bookmark.
Make a notch in the slider. This notch will show you the line at which you are to begin reading again.
When a book is open the page on one side will have an odd number. The page on the other side will have an even number. If you are stopping on a page...
Remove these ads by
Signing Up
Not NiceInappropriateSpam5,192 views
27 favorites
Posted:
Sep 5, 2008
License:
PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format.
You also have the ability to customize your PDF download.
Visit Our Store »
Go Pro Today »