For this instructable you will need:
Wire cutters to cut the wire
Wire - any pretty much any guage can be used determined on what you need the twisted wire for
A phillips head screw driver, the longer the better so you can hold onto it while twisting
A power drill ( I personally prefer to use my hubby's cordless, just because there is no cord to deal with and I don't have to find a place to plug it in)
And even though I didn't mention it, or put them in the photo, you really should protect your eyes!
Step 1: Cut the wire and fold it in half
I cut a 20 inch piece of wire for this project, and after twisting and trimming I had a 5 inch piece left. This will vary for the guage of wire and the amount of twisting applied.