Introduction: A Quick and Rustic Wine-cork Board

Picture of A Quick and Rustic Wine-cork Board

In this project I will show you how to build a simple rustic wine-cork board. See to the .wmv file below for a step by step visual guide.


-Hot Glue-Gun

-A Hacksaw

-A finishing or fine Mill File

-Hot Glue sticks



-Wood-working Wedges

Project Level: Easy

Step 1:

Picture of

First get a bunch of corks if you have old ones great but if you do not that is fine just buy some.

Step 2:

Make a square or rectangle of the corks. Then divide it into three equal parts.

Step 3:

Picture of

Then heat up your heat glue gun. After that, cut some wood-working wedges to the length of the three equal parts.

Step 4:

Picture of

Then glue each individual cork to the wood strips.

Step 5:

Picture of

Then cut two more strips and glue then to the bottom then cut 4 more strips for the frame and glue them on too. After you are done gluing take a mill or wood file and clean up any rough edges. Clean up and you are done!

Step 6: (optional)

You can make this in any size shape or form so... Get creative!


The DIYinventor (author)2016-06-16

My first instructable!

wold630 (author)2016-06-17

I like how the different wine stained corks look!

The DIYinventor (author)wold6302016-06-17


About This Instructable




Bio: I've been building for as long as I can remember.
Add instructable to: