Print PDF
Favorite
Email
Step 3All The Peeps Are Here, Lets Party!
Take notice of the prong sizes, one is larger than the other. This is for polarity, the small prong being the 'Hot' and the larger being the 'Neutral'
With a fine point marker, mark one plug 'Device' the other 'Test'
The Test plug gets a 90 degree bend on the Neutral prong
This needs to be soldered to the Hot on the Device adapter
I screwed these together temporarily to solder, I also plugged a cord into it to pull most of the heat from the adapter as I soldered it, so the heat wouldn't melt or weaken the adapter as I soldered it.
With a fine point marker, mark one plug 'Device' the other 'Test'
The Test plug gets a 90 degree bend on the Neutral prong
This needs to be soldered to the Hot on the Device adapter
I screwed these together temporarily to solder, I also plugged a cord into it to pull most of the heat from the adapter as I soldered it, so the heat wouldn't melt or weaken the adapter as I soldered it.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
