Print PDF
Favorite
Email
Step 5Hollow out the heel to fit the electronics.
Some digging away with a chisel and a precision screwdriver, and the help of a steel shoe last to hold the shoe still, you should have a shoe with a H500 shaped hole in the heel.
Make holes for the speaker and microphone. I organised for the microphone to peek out the side a bit, since it seemed like a good way to work it.
The big hole in the photo is for the H500 board and front cover (which I decided to retain so that the answer/hang up button would work without too much effort). There are two little holes nearer the top of the image to take the speaker and microphone.
Make holes for the speaker and microphone. I organised for the microphone to peek out the side a bit, since it seemed like a good way to work it.
The big hole in the photo is for the H500 board and front cover (which I decided to retain so that the answer/hang up button would work without too much effort). There are two little holes nearer the top of the image to take the speaker and microphone.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
