Print PDF
Favorite
Email
Step 7Prepare the rubber sole for reattachment
Make three holes for: (1) the answer/hangup button; (2) the speaker; and (3) the blue led on the headset (this is nice to so you can see when it is charging, and also just for looking cool).
You don't need to make a hole for the microphone, because it comes out the side. Also, the microphone in the H500 is so sensitive, it would probably work through the solid rubber.
You don't need to make a hole for the microphone, because it comes out the side. Also, the microphone in the H500 is so sensitive, it would probably work through the solid rubber.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
