Print PDF
Favorite
Email
Step 3Connect all the parts
Take the LED (or buzzer) and attach the smallest wire to one side and the 14" wire to the other side. Then take the small wire and attach the other end to a pole on the battery. Then take the longest wire, and attach the end to the other pole on the battery. Refer to the picture to see how to attach. All connections should be made with electrical tape.
Note: If you are using an LED or other polarity sensative device, make sure you have all the poles correct for it to work. By switching the wires around on the battery, you can check to see if it is correct.
Note: If you are using an LED or other polarity sensative device, make sure you have all the poles correct for it to work. By switching the wires around on the battery, you can check to see if it is correct.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
