Introduction: A. USB COVER

Picture of A.   USB COVER

List of Materials:

·         1 package of Sugru

·         1 little metal hook

·         1 USB without cover

Step 1: The Guide:

Picture of The Guide:

1.    - Make a long Sugru strip (approximately 50 centimeters).

Step 2: Assemby 1:

Picture of Assemby 1:

Put on the left side of the USB and begin rolling with the Sugru strip (as shown in the picture)

Step 3: Assemby 2 and Finish:

Picture of Assemby 2 and Finish:

Finally we are going to lay the little metal hook on top (see picture) and bring them together.In this way we will be able to use it as a key chain.


About This Instructable




More by OpenL4BNorte _ Hackerspace:Pedal with 386 and 555Simple water level detector using a LM555 in astable mode:A.   USB COVER
Add instructable to: