Instructables

A bottle lamp with led tape.

Picture of A bottle lamp with led tape.
IMG_9257.JPG
This is a very simple project that I created using three parts.

a) an old part of a tool (probably for connecting cables) which consists of a plastic base and a strong spring.
b) a medium sized bottle
c) 1m led tape with adaptor
 
Remove these adsRemove these ads by Signing Up

Step 1: Spring-bottle connection.

Picture of Spring-bottle connection.
At first I inserted the spring in the bottle, so that they cannot disconnect easily. The spring is quite strong and can keep the bottle in a steady position.

Step 2: Inserting the led-tape in the bottle.

Picture of Inserting the led-tape in the bottle.
DSCN1895.JPG
P5080003.JPG
P5080004.JPG
I then pass the 1m led tape through the spring and little by little put it in the bottle. The lamp is ready!