Print PDF
Favorite
Email
Step 8Big time gluing.
Get out your fast set epoxy. Put a large gob into the other shell. mix well. Then quickly snap the two parts of the egg together and stand it up with the wire out the bottom. Move quickly enough that the epoxy will run down and cover the bottom of the motor. Hold it in the position (you did use the FAST setting stuff, right?)
If you have the other kind of egg, mix the epoxy in another container and pore it into the bottom of the egg. Put some of the epoxy on the lip of the egg and close it up.
If you have the other kind of egg, mix the epoxy in another container and pore it into the bottom of the egg. Put some of the epoxy on the lip of the egg and close it up.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
