Print PDF
Favorite
Email
Step 13MAKE THE SWITCH
To make the switch, take two little paper clips and gently bend them out before re-bending them into the shapes shown. The little end bits are for soldering to and these should be roughed up a bit with sandpaper or an emery board.
To make the hoop, bend the wore round a stick or handle of the same diameter as the larger end of the wand.
To make the hoop, bend the wore round a stick or handle of the same diameter as the larger end of the wand.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
